Mediji

How to Improve Indoor Air Quality in Modern Prefab Houses?

Nov 19, 2026

Modern prefab houses combine factory manufacturing with on-site assembly, requiring careful planning of walls, roofs, windows, doors, and interior finishes. Indoor air quality depends not only on building materials but also on airtightness, ventilation, and moisture management.

Improving indoor air quality requires controlling pollution sources while coordinating ventilation, moisture protection, and air filtration during the design and construction stages. These measures help reduce pollutant accumulation and the risk of mold growth.

Prefab Houses Modern

What Affects Indoor Air Quality in Modern Prefab Houses?

1. Pollutant Emissions from Building and Interior Materials

Wall panels, flooring, adhesives, sealants, paints, and furniture can all contribute to indoor air pollution. Formaldehyde and other volatile organic compounds (VOCs) are particularly important to consider.

Emission levels vary among materials, so odor alone cannot determine whether a product is safe. When selecting materials, pay attention to the following:

▪Panels: Check formaldehyde emission classifications and relevant test reports, especially for composite wood products.

▪Paints and adhesives: Prioritize products with reliable low-VOC emission test documentation.

▪Sealants: Select products compatible with the substrate and intended application environment.

During factory production, adhesives, coatings, and sealants should be applied and cured according to their manufacturers' instructions. Materials should not be enclosed or covered before reaching the required curing conditions, as premature assembly may affect their performance and indoor air quality.

2. Building Airtightness and Insufficient Ventilation

Modern prefab houses typically control air leakage through wall joints, window and door connections, and roof details to reduce unnecessary heat loss. However, improved airtightness can reduce natural air infiltration. Without adequate ventilation, carbon dioxide, water vapor, and other indoor pollutants may gradually accumulate.

Airtightness and ventilation must therefore be considered together during the design process. Increasing gaps in the building envelope is not an appropriate way to improve ventilation. Instead, controlled ventilation should be designed according to the floor area, occupancy, and intended use of each space.

How to Improve Indoor Air Quality in Modern Prefab Houses

1. Design an Effective Mechanical Ventilation System

For modern prefab houses with relatively high airtightness, mechanical ventilation provides more consistent and controllable air exchange.

A common residential approach is to supply fresh air to living rooms and bedrooms while exhausting air from kitchens and bathrooms, where moisture and pollutants are generated more frequently. The actual layout should be determined by the building configuration and ventilation equipment.

Key design considerations include:

◆Position air outlets properly: Avoid placing supply and exhaust vents too close together, which can cause short-circuit airflow.

◆Maintain effective airflow paths: Consider how interior doors, partitions, and room layouts affect air movement to ensure adequate ventilation throughout occupied spaces.

◆Install suitable filters: Select filtration levels according to outdoor air quality to reduce the entry of dust, pollen, and other airborne particles.

◆Consider heat recovery: In climates with heating or cooling demands, heat recovery or energy recovery ventilation may help reduce energy losses associated with outdoor air exchange.

Ventilation airflow rates should be calculated and verified through system commissioning. Equipment rated capacity alone does not guarantee actual ventilation performance.

2. Control Moisture and Condensation Inside Wall Assemblies

Walls in modern prefab houses typically consist of structural layers, insulation, air-control layers, and interior and exterior finishes. If these components are not properly designed, moisture may enter the wall assembly and condense on colder surfaces.

Moisture moves through building envelopes mainly in two ways. Air leakage carries water vapor through gaps and joints, while vapor diffusion occurs through materials due to differences in vapor pressure. These mechanisms require different control measures, so a vapor retarder alone cannot address every moisture-related issue.

During design and construction, pay attention to the following:

▹Maintain continuous air sealing around wall joints, windows, doors, and service penetrations to limit the movement of humid air into wall cavities.

▹Determine the location and construction of vapor control layers based on local climate, indoor humidity, and the vapor permeability of building materials.

▹Avoid inappropriate combinations of multiple low-permeability layers that may restrict the drying potential of the wall assembly.

▹Provide effective waterproofing at exterior walls, roofs, and window connections to prevent rainwater intrusion.

Indoor relative humidity is generally recommended to remain between 30% and 50%, while prolonged levels above 60% should be avoided. The appropriate range may vary depending on local climate and building conditions.

3. Maintain Air Filtration and Ventilation Equipment

Air filtration primarily reduces airborne particles. It cannot replace fresh air ventilation or directly eliminate formaldehyde and most gaseous VOCs.

For modern prefab houses equipped with heating, ventilation, and air conditioning (HVAC) systems, filters should be selected according to the equipment's allowable pressure drop. A filter with an excessively high efficiency rating may increase system resistance and reduce actual airflow if the fan is not designed to accommodate it.

Filters, air ducts, and condensate drainage systems should also be inspected regularly. Cleaning or replacing filters as needed helps prevent dust accumulation, blockages, and standing water from affecting indoor air quality.